Stone Maintenance
Stone Maintenance:
Natural stone surface of very small pores, whether as the main component is calcium carbonate, marble, or to silicate as the main ingredient
Granite, they are not acid, acid often causes granite pyrite oxidation and vomiting yellowing, acid will break down in the marble
Containing calcium carbonate, resulting in surface erosion conditions. Base will be eroded granite and quartz feldspar crystallization of the silicide grain boundaries caused by the phenomenon of spin-off
Moreover, if the water into the stone, the stone will be due to exposure to mineral salt water and chemical reaction, macular, rust, white and Chinese, and even
The bursting phenomenon. Stone maintenance essentials is to "use neutral agents" and "to prevent water infiltration, so that water vapor exhaled."
Crystal surface treatment:
And protection compared to the previous stone waxing, crystal surface treatment is the best way to maintain the stone surface.
Waxing to protect the stone surface covered in wax to protect the surface, because of stone and wax layer of reflective reflective inconsistent, stone floors by waxing will significantly
Was a blur. When maintenance again, if can not afford to wax the surface of the existing stone impact protective wax will become a barrier to penetrate into the stone house
Hinder. At this time, between the stone and the ground will be of cement or adhesive slowly because of moisture or chemical reaction "invasion" of the body of the stone, causing stone pan
Alkali, and stains and other diseases. If the wax, mostly from the strong alkaline water wax, marble, calcium carbonate because of corrosion and aging rapidly, granite stone
British high corrosion resistance, but the feldspar and mica are intolerant corrosion, pitting then expanding to deepen, the surface becomes uneven.
Crystal surface treatment is the use of crystal hardening agent with brush machine for stone surface friction, under the dual role of chemistry and physics, so that the ground surface to form a strong
Hard dense crystalline hard layer, so that stone surface to be easily damaged, are not easy to stick dye stains. Crystal surface treatment did not change the structure of stone, is not coated with a layer of
Cover, therefore, does not change the texture of the original stone. Through the crystal surface treatment, the stone surface molecule is more compact, significantly improved gloss, make more beautiful stone surface
Korea, more noble.
Protective treatment:
Stone-static treatment is protective stone is the stone for water and oil stain treatment. Protection process of stone made of stone can provide a full
Surface protection against such as water, dirt, grease and other infiltration, mineral salts can also be brought against a stone, the resulting white Chinese or rust stains and so on.
At present the main points of the protective agent of the two water-soluble and oil-soluble, water repellant and sub-type and pollution prevention (both water and oil) two, there is a
Some special effects of protectants, such as tide, UV, deepen stone color, with light effects, and should be based on the stone type, installation location, installation
The correct selection of the different processes corresponding repellant.
After the stone through the protection does not mean never troubles, post-care is very important. Promptly clean up stains, avoid high-pressure washing, proper use of pharmaceutical,
Regular maintenance is keeping the stone strengthening the protective effect of effective measures.
Stone Renovation:
If natural stone without the maintenance or improper maintenance time, a large area of surface scratches, defacement or improper or laying new stone construction period insurance
Inadequately protected, the surface is heavily contaminated or appear uneven phenomenon, seriously affect the appearance of natural stone decorative effect. Need for the stone
Refurbished. Stone have been renovated, can be restored to its original brightness and natural color.
Renovation of the main stone grinding process, fill joints, polishing, protection, conservation of the five surface processes.
The purpose is to make the stone grinding the surface smooth no bump;
The purpose is to fill up the old seam sewn with residual hole;
The purpose is to make the stone polishing the overall light;
Protection is intended to penetrate the stone-like protection against the material against the outside world;
Crystal surface conservation purposes is to create a hard surface, the surface more resistant to light stone
